UN 0055: EMPTY PRIMED BRASS, INTERNATIONAL VESSEL

COMMODITY: Empty primed brass or hulls

MODE OF TRANSPORTATION: International Vessel

OVERVIEW

PROPER SHIPPING NAME:Case, cartridges, empty with primerLABEL:None
IDENTIFICATION NUMBER:UN0055PLACARD:None
HAZARD CLASS/DIVISION:1.4SEMERG. INFO:Required
PACKING GROUP:TRAINING:Required
DOCUMENT:RequiredPACKAGING:P136
MARKING:Required  

DANGEROUS GOODS LIST

CLASSIFICATION

Empty primed cases which meet Division 1.4 criteria are not regulated in the US as hazardous materials. They are regulated for international vessel transportation as a Division 1.4S explosive. The IMDG requires competent authority approval of explosives. The US DOT hazardous materials table assigns Special Provision to UN 0055, which constitutes a competent authority approval satisfying the IMDG. No EX approval is required, and this is corroborated by an interpretation.

Citation: IMDG 2.1.3.2; 49 CFR 172.101, 172.102 Special Provision 50

PACKAGING

Package the cases as follows:

  • Ammunition must be packed according to Packing Instruction 136.
  • The maximum gross weight is limited to 400 kg (882 pounds) per package, which is found in the standards for each type of package in IMDG 6.1.4.

Citation: IMDG 4.1.4, 6.1.4

SHIPPING PAPER REQUIREMENTS

1) Shipping description together and in order with no other information interspersed:

“UN 0055, Cases, cartridge, empty with primer, 1.4S”.  There is no packing group.

2) The total quantity in kilograms (kg) in terms of net explosives mass, i.e. the weight of the powder and primer mix (primer mix may be negligible compared to powder) in the ammunition.  The degree of decimals or rounding is not specified, the recommendation is to use whole units, e.g. 5 lbs.

3) The number and kind of packages, before or after the shipping description, e.g. “10 boxes” or “10 drums”. Commonly understood abbreviations may be used, e.g. “bx” or “drm”. Use of a packaging code such as “4G” is not compliant but is optional as an addition; not recommended.

DESCRIPTIONWEIGHT/LBS.
UN0055, CASES, CARTRIDGE, EMPTY WITH PRIMER, 1.4SX,XXX KG (net explosives mass)

Citation: IMDG 5.4.1.4.1, 5.4.1.4.2, 5.4.1.5.1

 PACKAGE MARKING

Packages containing small arms ammunition must display the following markings on one side as follows:

  • “UN 0055” ½” tall, or ¼” tall for 30 kg max, or an appropriate size for 5 kg max
  • “CASES, CARTRIDGE, EMPTY WITH PRIMER”
  • Specification package marking, ½” tall, or ¼” tall for 30 kg max, or an appropriate size for 5 kg max
  • The package must bear a 1.4S label UNLESS “1.4S” is marked. The “1.4S” mark is the industry norm, labels are not used.

Neither the consignor’s or the consignee’s name and address are required.

Citation: IMDG 5.2.1.1, 6.1.3.1

OVERPACK MARKINGS

An overpack is:

  • a pallet
  • a spec packaging within a non-spec packaging, normally used for consolidation

The “Overpack” marking is required if at least one representative marking is not visible of the UN number, proper shipping name and the specification packaging marking for every hazardous material in the overpack. If any of these are not visible at least once in the overpack, all markings and labels should be reproduced on one side of the over, in addition to the “OVERPACK” mark.

The word “OVERPACK” may be a sticker, stenciled, or on a printed sheet of paper. It must be at least 0.5” tall as of 12/31/2016. It does not have to have a surrounding border.

Citation: IMDG 5.1.2.1